Domestic Plumbing & Heating

● Max pressure ½” - 1”: 30 bar
● Max pressure 1¼” - 2”: 20 bar
● Max temperature: 99˚C
● Working temp. range: -20 - 100˚C
● Strainer mesh size: 500 μ - 0.5 mm
● Threaded ends: ISO 228 - 1

Sealed system kit comprising: expansion vessel up to 12 litre capacity,
WRAS Approved filling loop, safety relief valve, pressure gauge, integral mounting
bracket and assembly connector allowing left or right installation on the system

● Seven day programmer

Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.

The Altecnic 5219 thermostatic mixing valves are designed primarily for single outlet use.

It delivers mixed hot water at a set temperature to taps, showers, baths and bidets making it ideal for use in domestic and commercial hot water systems.

The electronic hybrid mixing valve combines the typical function of the mechanical thermostatic mixing valve and the management efficiency of an electronic mixing valve in a single device.

The thermostatic mixing valve responds promptly to any variation in temperature, pressure and inlet flow rate to quickly restore the mixed water temperature to the outlet.

This standard mixing valve is effectively handled by a motorised actuator that, under the control of a specific regulator, changes the mixed water temperature set position.

The electronic mixing valve is used in centralised systems that produce and distribute domestic hot water.

Its function is to guarantee and maintain the temperature of the domestic hot water delivered to the user when there are variations in the temperature and pressure of the hot and cold water at the inlet or in the draw-off flow rate.

This particular series of electronic mixing valves is equipped with a specific regulator that controls a set of programs for circuit thermal disinfection against Legionella.

It also allows checking that the thermal disinfection temperature and time are actually reached and means the appropriate corrective action can be taken. All the parameters are updated every day and logged, with temperatures recorded every hour.

Depending on the type of system and habits of the user, it is possible to program temperature levels and operation times in the most appropriate manner. In addition, it is fitted for a monitoring and remote control connection.